Drum Centrifuge Model CNT16

Centrifugal sludge-water separator with physical removal of glass fines from process water waste. Suitable for direct connection to Edgers, Bevellers and CNC machines.

DOES NOT USE CHEMICAL AGENTS
AVOID PERIODIC CLEANING OF THE MACHINE WATER TANKS
AVOID CLOGGING OF WATER PIPES, TUBES AND BRUSHES
INCREASE THE LIFE OF THE MACHINES AND REDUCE THE NEED FOR MAINTENANCE DUE TO GLASS FINES
INCREASE THE LIFE OF DIAMOND AND POLISHING WHEELS
OBTAIN BETTER POLISHING

Machine operation:
Process water is pumped to the rotating drum inside the separator by a dedicated submersible pump. The glass fines suspended in the fluid are “pushed” against the drum walls by the effect of the centrifugal force, letting the purified water flow. After some time, depending on the volumes processed, the operator stops the separator to take out the glass sludge inside the drum. Once opened the separator, protected by a sensor opening system (that allows opening only after that the drum has finished turning), the operator removes the drum full of sludge and replace it with a clean drum, re-starting the separator again.

<<< Vertical Washing Machines

Straight line edging machines with peripheral wheels >>>

for further information on these sytems please download our brochure
"Drum Centrifuge"
or else contact us directly at info@zafferani.com